T1012.12M Hybrid Amplifier – The OEM System Terminator
✅ 10 High-Level + Optical/Coaxial/USB/BT：
· 4-18V input range for Mercedes/BMW factory systems.
✅ Hybrid AB/D Class Technology：
· 4×50W@4Ω (D Class for bass)
· 8×35W@4Ω (AB Class for mids/highs), 90dB SNR clarity.
✅ Dual-Core DSP + APTX HD：24Bit/192KHz wireless streaming with studio-grade precision.
✅ 31-Band EQ & 15ms Alignment：Pinpoint staging for driver-centric audio perfection.
✅ Military-Grade 35A Current：MIL-STD-810G certified for extreme environments.
✅ LED Command Center & 10 Presets：iOS/Android/PC control with live tuning sync.
Engineered For：Luxury car 3-way systems, overland builds, armored vehicle audio labs.
| Specification | T1012.12M |
| Input | 10 High Level/2 RCA/USB Audio/BT/Optical/Coaxial |
| Input Voltage(Max) | High Level-4-18Vrms, RCA - 2-5Vrms |
| Output | 12 High Level/10 RCA |
| Output Voltage (Max) | Amplifier output -18V/13Vrms, RCA-1.5Vrms |
| Output Gain | Power Amplifier :26 dB |
| Optical In | Yes |
| Coaxial In | Yes |
| Amplifier type | Class AB/D |
| Power Output | 4X50W @ 4 Ω+8X35W @ 4 Ω 4X70W @ 4 Ω+8x60W@ 2 Ω |
| (AD & DA) Signal Conversion | CIRRUS LOGIC 32bit CS47048C-DQZR， CS47L35 |
| Sampling Rate | 24Bit/192KHz ADC/DAC |
| EQ/Delay | 31Band EQ/ 15ms |
| Frequency Range | 20Hz- 20Khz |
| Q Value(Slope) | 0.5-9 |
| EQ Gain | -18.0dB +12.0dB |
| Filtering | Butter , Bessel, Link |
| Filtering Crossover point | 20Hz-20Khz |
| Filter slope | 6dB/oct -48dB/Oct |
| Phase | 0-180 |
| Time Alignment (delay) | 15ms |
| Preset | 10 |
| Frequency Response | 20-20kHz |
| Signal to Noise - RCA | 85dB |
| Signal to Noise - Power Amp | 90dB |
| Input Resistance | 20kΩ |
| Low level output Resistance | 680Ω |
| Static Current | 1.2A |
| Operating Voltage | 9-16V |
| Working Current Range | 1.5-35A |
| Temperature resistance | Yes |
| Bluetooth | Yes |
| Bluetooth Version | Built in APTX HD |
| USB Audio Built in | Yes |
| USB DISK | NA |
| Remote | LED/圆屏线控 |
| PC Connection | yes |
| PC Software | yes |
| Android App | yes |
| IOS app | Yes |
| Auto Tuning | NA |
| REM Input | 3.5V |
| REM Output | 0.1A |
| Over heat protection | Yes |
| Over Load Protection | Yes |
| Working Indicators | Yes |
Copyright © 2026 Shenzhen Moshangyin Electronics Technology Co., Ltd. All rights reserved. Privacy Policy | Terms & Conditions